Difference between revisions of "Customised Firmware - Features Available"
(Point sidecar 2.8 windows version to the forum) |
(Point sidecar 2.8 linux version to the forum) |
||
Line 1,327: | Line 1,327: | ||
| [[Custom_Firmware_Package_Notes#hmt-solaris | '''NOTES''']] | | [[Custom_Firmware_Package_Notes#hmt-solaris | '''NOTES''']] | ||
|- | |- | ||
− | | [ | + | | [https://hummy.tv/forum/attachments/sidecar_2-8_linux_x86-zip.4064/ sidecar_2.8_linux_x86 platforms (By raydon)] |
| [[Custom_Firmware_Package_Notes#Sidecar | '''NOTES''']] | | [[Custom_Firmware_Package_Notes#Sidecar | '''NOTES''']] | ||
|- | |- |
Revision as of 23:34, 30 April 2019
After a successful upgrade of Customised Firmware some extra features are immediately available e.g. HTTP and Telnet, The Standard FTP Server will still be available for access to 'Media' Files, FTP Notes HERE, For access to the full File System see Betaftpd Notes. HERE. You can add extra features using the Web Interface, Via Telnet or VIA USB (See Guide), The Tables below show the additional packages available e.g. Web-IF >> Package Management screen, the package links below are only required by Humax boxes that don't have access to the internet
Bundle files (e.g. *.OPB) contain additional support files |
---|
Flash Bundle files (for the HD FOX-T2) |
---|
Loadable Only Via USB |
---|
For Information on Web-If Packages See NOTES
Features Built into The Full Web Interface
NOTE: When the full Web Interface is installed via HTTP the following features are automatically added.
Single Package Links | Bundle Links | Info. Links | Built into Web-If |
---|---|---|---|
Fix-Disk HDD analyse and repair utility | N/A | NOTES | Embedded |
HTTP Access (Simple Web Interface) | N/A | NOTES | Embedded |
OPKG 0.1.8 Open PacKaGe Management | N/A | NOTES | Embedded |
Telnet | N/A | NOTES | Embedded |
WEB Interface Ver 1.4.2-7 for the Humax | Via HTTP | Yes | |
EPG Ver. 1.2.7 (Command Line) | NOTES | Yes | |
Busybox 1.20.2-1 Unix Utilities | NOTES | Yes | |
HMT Utility 2.0.10 | NOTES | Yes | |
Jim TCL Interpreter 0.77 | NOTES | Yes | |
- Jim CGI 0.7-1 | NOTES | Yes | |
- Jim Sqlite 0.77-1 | NOTES | Yes | |
- Jim Object Orientation Extension 0.77 | NOTES | Yes | |
- Jim Pack for 0.71 | NOTES | Yes | |
LSOF LiSt Open Files diagnostic tool 4.87 | NOTES | Yes | |
Service Control Utility 2.5 | NOTES | Yes | |
SQLite3 3_3.15.1 utility & library | NOTES | Yes | |
SSMTP 2.64 E-Mail sender | NOTES | Yes |
Features Loadable From the Package Management screen
Note:- Advanced Packages are only displayed in the Package Management screen if 'Turned On' in :- Web-if >> Settings >> Advanced Settings >> Show development and advanced packages = Yes
Features only loadable Via USB (Not available from Web-If)
Feature | Bundle Links | Info. Links | USB |
---|---|---|---|
Enable Telnet re-enables Telnet after a notelnet | NOTES | Y | |
DeRMA remove RMA Message from the front Panel | NOTES | Y | |
Portal Xtra1 0.12.064.300-1 (Flash Version) | NOTES | Y | |
Reset Webif (Via USB) | NOTES | Y | |
kernel with EFI support (Via USB) | NOTES | Y | |
Factory Reset Update File (HDR-Fox T2) | NOTES | Y | |
Factory Reset Update File (HD-Fox T2) | NOTES | Y | |
Clear IP Tables (HDR Fox T2) | NOTES | Y | |
Force Maintenance mode (HDR Fox T2) | NOTES | Y |