Custom Firmware Package Notes

From hummy.tv Wiki
Revision as of 01:19, 23 December 2011 by Ezra pound (talk | contribs) (→‎Web IF)
Jump to: navigation, search

BREIF NOTES FOR CUSTOM FIRMWARE PACKAGES

Note Note: Some Functions of the Web Interface are 'Built-In' and do not require an additional package to be installed, These Features are covered in the Web If section of ths page

Auto-Unprotect

Removes the ENC flag from all High Definition files, When first installed all files are scanned, Then new files are processed after recording ends. NOTE:- the removal of the ENC flag does not decrypt the file, However it does make decyption possible


Auto-Update

This will check once per day at the earliest power on, for most people probably the 04:30 boot


BusyBox

Your Humax box has a ‘Unix’ operating system, Busybox is a package that provides 158 common Unix commands that can be used in a Telnet sessions, The List below shows the available commands, There is no 'man' command that would explain what they do, but most commands can have a -? or -h extention to get some help e.g. ls -?, A command look up table can be found HERE

NOTE:- It is not a good idea to 'Play' with these commands if you don't know what you are doing

  • [
  • [[
  • ar
  • arp
  • arping
  • ash
  • awk
  • base64
  • basename
  • bunzip2
  • bzcat
  • bzip2
  • cal
  • cat
  • catv
  • chgrp
  • chmod
  • chown
  • chroot
  • cksum
  • clear
  • cmp
  • comm
  • cp
  • cpio
  • cut
  • date
  • dc
  • dd
  • df
  • diff
  • dirname
  • dos2unix
  • du
  • echo
  • ed
  • egrep
  • env
  • ether-wake
  • expr
  • false
  • fgrep
  • find
  • fold
  • free
  • ftpget
  • ftpput
  • fuser
  • grep
  • gunzip
  • gzip
  • hd
  • head
  • hexdump
  • ifconfig
  • insmod
  • install
  • iostat
  • kill
  • killall
  • killall5
  • last
  • less
  • ln
  • logname
  • ls
  • lsmod
  • lsusb
  • lzcat
  • lzma
  • md5sum
  • mkdir
  • mkfifo
  • mknod
  • mktemp
  • modinfo
  • modprobe
  • more
  • mpstat
  • mv
  • nc
  • netstat
  • nice
  • nmeter
  • nohup
  • nslookup
  • od
  • patch
  • pgrep
  • ping
  • pkill
  • pmap
  • printenv
  • printf
  • ps
  • pstree
  • pwd
  • pwdx
  • readlink
  • realpath
  • renice
  • rm
  • rmdir
  • rmmod
  • route
  • rpm
  • sed
  • sendmail
  • seq
  • sh
  • sha1sum
  • sha256sum
  • sha512sum
  • sleep
  • sort
  • split
  • stat
  • strings
  • stty
  • sum
  • sync
  • sysctl
  • tail
  • tar
  • tee
  • telnet
  • test
  • tftp
  • time
  • top
  • touch
  • tr
  • traceroute
  • true
  • tty
  • uname
  • uniq
  • unix2dos
  • unlzma
  • unxz
  • unzip
  • uptime
  • usleep
  • uudecode
  • uuencode
  • vi
  • watch
  • wc
  • wget
  • which
  • who
  • whoami
  • xargs
  • xz
  • xzcat
  • yes
  • zcat


CIFS

The Common Internet File System. The cifs package provides the Humax with the ability to remotely access files shared from PCs using Windows file sharing. This package adds the support to the running system but mounting remote filesystems must currently be performed from the command line

Example:- 

mkdir /media/NAS
mkdir /media/My\ Video/NAS

mount -t cifs //server/share /media/NAS -o user=abc,password=def

mount -t cifs //server/share /media/My\ Video/NAS -o user=abc,password=def

Custom TV Portal

Full Guide HERE


Dedup (Command Line)

Note:- There is a 'built-in' version of Dedup in the Web-If that effectivly replaces the command line package, However if the dedup package is installed it is possible to perform the following Telnet commands from the folder you have navigated to:-

dedup HIDE lists the recordings there and shows what they would be renamed to

dedup -yes HIDE perform the changes as detailed below :-

  • Renames the files on disk to match the episode name
  • Changes the title shown in the media list to match the episode name
  • Identifies duplicate episodes and moves them to a sub-folder called dup/


Edit On Box

Full Guide for Nicesplice HERE


EPG (Command Line)

EPG information can be obtained from a Telnet Command line e.g.

epg 


humax# epg
Humax EPG Tool v1.0.8, by af123, 2011.

Syntax: epg [options] [filters] <command>...

  Options:
    -b                     Brief output.
    -d[level]              Set debug level.
    -f<file>               Specify alternate EPG data file.
    -h                     Show help text.
    -p                     Parsable output.

  Filters: (can be specified multiple times, all must be true)
    -C<CRID>               Show only events with this CRID.
    -D<descriptor type>    Show only selected descriptor type.
    -E<event id>           Show only selected event.
    -R<SCRID>              Show only events with this Series ID.
    -S<service id>         Show only selected service.
    -T<content type>       Show only selected content types.
    -@<unix timestamp>     Show only programmes at time.
    -/<unix timestamp>     Show only programmes on day.
    -/<days>               Show only programmes on day.
    -=<start>:<end>        Show only programmes in time period.

  Commands:
    dump                   Show a parsed summary of the EPG.
    dumpraw                Show raw data from the EPG.
    sqldump                Produce SQL statements from EPG data.
    sqlitedump <file>      Create SQLite database from EPG data.
    now                    Show what is currently on.
    first                  Show the time of the earliest record.
    last                   Show the time of the latest record.
    parse                  Parse the EPG, no output.
    search <text>          Search programme names for text.
    searchall <text>       Search programme names/descriptions for text.


Epg Keywords (Web-If)

Initial Setup :-

  • Web-If MAIN >> SETTINGS >> Email address >> myname@talktalk.co.uk
  • Web-If MAIN >> SETTINGS >> SMTP >> smtp.talktalk.co.uk
  • Web-If MAIN >> SETTINGS >> SEND TEST EMAIL


FTP

File Transfer Protocol is a method of transferring files to and from your Humax, The Humax HDR has a built-in FTP for access to the media folders only. The Enhanced FTP supplied with the Custom Firmware Package allows access to the full Humax file structure. To use FTP on a P.C. a program that handles FTP is required, Internet Explorer and Windows (file) Explorer will allow FTP access by entering ftp://10.0.0.200 into the address bar, Although access may be restricted to media folders only. If access to the whole file structure is required programs like Filezilla or WS_FTP_Pro can be used.

Note :- 10.0.0.200 needs to be replaced with your own Humax IP address


HMT

From a Telnet Session, Navigate to a directory containing an *.hmt file, Then enter hmt {filename}

hmt KAISER_CHIEFS_DD5_1_20110410_0147.hmt 

humax# hmt KAISER_CHIEFS_DD5_1_20110410_0147.hmt
Format:HD
Title:KAISER CHIEFS DD5.1
Channel:4096 (BBC HD)
Folder:/mnt/hd2/My Video/MY-ARCHIVE/
Filename:KAISER CHIEFS DD5_1_20110410_0147
Genre:Entertainment
EPG:Performance from the Kaiser Chiefs from the Later... with Jools Holland archives.
 They play I Predict a Riot, the party and festival anthem of 2005.

Flags: HD,Unlimited Copies,
Copy count:0

Scheduled start:1302396300 (Sun Apr 10 00:45:00 2011)
Scheduled duration:300
Recording start:1302396449 (Sun Apr 10 00:47:29 2011)
Recording end:1302396706 (Sun Apr 10 00:51:46 2011)
Play resumes at: 15 seconds in.

Service ID (SID):17472
Transport Stream ID (TSID):16516
Originating Network ID (ONID):9018
Programme Map Table PID (PMTPID):100
Video PID:101
Audio PID:102
Bookmarks:0 =

I-Phone Interface

Screen Shots HERE


lsof

This unix command stands for LiSt of Open Files,With no extentions it will default to 'All' open files, But it is probably more useful when used with a filter as shown in the examples :-

lsof | grep humaxtv HIDE All files opened by the main Humax TV process

lsof | cut -f 1 -d' ' | sort | uniq HIDE List all processes that have opened files

lsof | grep epg HIDE All files opened by the EPG process 

humax# lsof | grep epg
epg 596 root  cwd  0000  31,0 1307722938  21474853357 /dev
epg 596 root  rtd  0000  31,0 1321652395  77309428205 /
epg 596 root  txt  0000  8,18 1322689164   4295000557 /mnt/hd2/mod/bin/epg
epg 596 root  mem   REG  8,18                 9226050 /mnt/hd2/mod/bin/epg (path inode=4295000557)
epg 596 root  mem   REG  31,0                     174 /lib/ld-uClibc-0.9.29.so (path inode=4295000557)
epg 596 root  mem   REG  8,18                 9225846 /mnt/hd2/mod/lib/libsqlite3.so.0.8.6 (path inode=4295000557)
epg 596 root  mem   REG  31,0                     169 /lib/libuClibc-0.9.29.so (path inode=4295000448)
epg 596 root  mem   REG  31,0                     216 /lib/libpthread-0.9.29.so (path inode=4295000448)
epg 596 root  mem   REG  31,0                     186 /lib/libdl-0.9.29.so (path inode=4295000448)
epg 596 root    0  0000  31,0 1307722935   4294975926 /dev/null
epg 596 root    1  0000  0,13 1322848876   4295000502 /tmp/epgd.log
epg 596 root    2  0000  0,13 1322848858   4295000502 /tmp/modinit.log


Jim

Jim is a form of the programming language TCL (Tool Command Language), That runs on the Humax unix platform


Mongoose

Mongoose is the Webserver that the Custom Firmware Package uses to present the Web pages you see when you log into the Web Interface, SEE EXAMPLES


Remote Scheduling (RS)

Full Guide HERE

Portal Foscam

See GUIDE


Prog Backup

Utility for backing up recordings and sidecar files to locally attached drives, A search of attatched drives will be made so that the user can choose. Both Hi-Def and Standard definition recordings will be de-crypted so they can be played on a P.C. or copied back to a different Humax. Command line examples Below :-


progbackup HIDE Backup everthing under My Video

progbackup "/mnt/hd2/My Video/BOB's Films/" HIDE Backup files in a specified folder

NOTE:- Make sure to use the quotation marks around the directory name.

Remote Scheduling Auto

Full Guide HERE

Series Filer

If a folder name exists at the top level and at a lower level, the contents of the top level folder are copied into the lower folder and the, now empty, top level folder is deleted


Service Control Utility

From a Telnet command line prompt send the following :-

service 

humax# service

Name                 Installed  Autostart  Running
----                 ---------  ---------  -------
mediatomb            No         No         No
dropbear             No         No         No
transmission         No         No         No
samba                No         No         No
cifs                 No         No         No
mongoose             Yes        Yes        Yes

Syntax:
        service start <service>
        service stop <service>
        service auto <service>          (toggles autostart)


SQLite

SQlite is an SQL database engine that contains a 'C' software library


SSMTP

SSMTP is a program to deliver an E-mail from your Humax to a mailhost or mailhub, It will not handle incomming E-Mail


Telnet

Telnet is built into the default Custom Firmware package, To communicate Via Telnet from a P.C. you will need a program such as PuTTY, Select connection type Telnet and enter the IP address of your Humax into the Host Name box, Then select OPEN, You will be presented with a new Telnet Window and if connection is successful you will see the humax# prompt.

NOTES

  • Telnet command lines on this WiKi are identified by a Yellow Background
  • Telnet >> Connection >> Telnet >> return Key sends Telnet New Line instead of ^M should be 'un-Ticked'


Unencrypt

unencryptsetup "Bob's Videos" HIDE process a single directory

unencryptsetup HIDE process all files in 'My Video'

unencryptsetup disable HIDE Turn off unencrypt

This will update the cron table and schedule the program to run every 15 minutes indefinitely. Every time it runs, it will check that there isn't already another job running and then decrypt the first encrypted file that it finds in the directory you specified, therefore gradually working its way through your files, If you don't specify a directory, it will default to decrypting all of your recordings.

NOTES:-

  • Auto-Unprotect must be running
  • Media sharing must = on
  • Telnet >> Connection >> Telnet >> return Key sends Telnet New Line instead of ^M should be 'un-Ticked'

Web IF

Screen Shots HERE

  • Crop

Web-If MAIN >> BROWSE MEDIA FILES >> (Select Single File) >> OPT+ >> Crop

See Edit on Box link HERE

  • Decrypt

Web-If MAIN >> BROWSE MEDIA FILES >> (Select Single File) >> OPT+ >> Decrypt

This Function will move the file an _original folder and then stream a new copy to the present location, The new copy will be Decrypted and can be played on a P.C.. NOTE both High Definition AND Standard definition need to be Decrypted


  • De-duplicate / Tidy this folder
Webif-media-ded.png
Webif-media-ded2.png

Web-If MAIN >> BROWSE MEDIA FILES >> De-duplicate / Tidy this folder

This Function will search a folder and re-name files with more meaningful titles, It will also seperate duplicates into a new folder

See Tidy (Re-name) Example >>

This Function will search a folder and re-name files with more meaningful titles

It will Also seperate duplicates into a new folder

See De Duplicate (to new folder) Example >>


  • Download

Web-If MAIN >> BROWSE MEDIA FILES >> (Select Single File) >> OPT+ >> Download

This function will download with decrytion an SD file (or Hi-Def File if the 'ENC' flag is removed) and place it into the default download folder on your P.C., The following items may inhibit it functioning correctly :-

  1. The File type *.TS must not be assosiated with a program such as a media player, It it is, Remove the association
  2. Your brouser must allow re-direction of addresses


  • Remove Enc

Web-If MAIN >> BROWSE MEDIA FILES >> (Select Single File) >> OPT+ >> Remove Enc

This Function will remove the ENC flag from High Definition content, The file remains encrypted (as does Standard Definition) until a sepearate decryption function is carried out


  • Save Last Streamed Content

Web-If MAIN >> BROWSE MEDIA FILES >> Save Last Streamed Content

This Function will make a permanent MP4 copy of and content that has been view using the Humax TV portal e.g. I-Player / You Tube, The Telnet Syntax is as follows :-

humax# cp /mnt/hd3/Streamer_down_file /media/My\ Video/theclip.mp4

wget

Retrieve files via HTTP or FTP

Note:- There is already a version of wget in Busybox which is loaded automatically, However it may be necessary to install the stand alone package as it will be a newer version

Retrieved from "https://wiki.hummy.tv/w/index.php?title=Custom_Firmware_Package_Notes&oldid=937"