Manually loading Features from USB

From hummy.tv Wiki
Revision as of 12:34, 18 November 2011 by Af123 (talk | contribs)
Jump to: navigation, search

Note Note: This page has been updated to detail the instructions for the Customised Firmware version 1.14 and above - that firmware will be released in the next few days.

If it is not practical to connect your Humax box to the Internet via a cable or wireless, then software packages can be loaded onto the Humax by placing them onto a USB Disk. The packages themselves can be downloaded from http://hummypkg.org.uk/packages.html. Each package is available for download as an individual file or as a bundle. A bundle contains the package itself along with all of its dependencies, and is the recommended way to install software.

= Example Download

HummyPkg Download Example.png

Installation Steps

  • Download the package(s)/bundle(s) you wish to add from http://hummypkg.org.uk/packages.html;
  • Place the files in the root directory (top-level folder) of your USB disk;
  • Make sure the Humax is on and running normally;
  • Plug the USB disk into a USB port.
The disk light will flash while the software is being installed;
The TV may show a menu relating to accessing media ont he disk which can be safely ignored (press Exit to dismiss);
  • A log relating to the software installation will be created on the disk, named opkg_install.log.
Retrieved from "https://wiki.hummy.tv/w/index.php?title=Manually_loading_Features_from_USB&oldid=724"