WebIf Remote Controller

From hummy.tv Wiki
Revision as of 13:08, 4 December 2012 by Ezra pound (talk | contribs)
Jump to: navigation, search
Ir.png

The IR package adds a fully functioning Remote Controller to the Web-Interface, It can be installed from the Web-If >> Package Management page and once installed a ‘Remote’ icon will be added to the Web-If Main screen


CHANNEL SHORTCUTS


Change

  • allow quick selection of a new TV/Radio station from a list

Customise

  • Add/Remove Favourite quick select channel Icons
  • Block remote control mode change icons on TV
  • Swap INFO and LIST commands
  • Select an alternative Remote Control Mode (1-6)

Also available in Web-If >> Settings >> Remote Control Settings

If you have forgotten which mode your original Remote Control is in, holding 0 + OK for 5 Seconds will reveal it on your TV screen


MACROS


  • record a sequence of key strokes, to be replayed with a single 'click'

Selecting Record a New Macro will display a Name Box and some delay keys to create a pause in the sequence

Ir-mob.png

HISTORY


Displays a clearable list of commands sent


MOBILE VERSION


There is a mobile version of the Web-If Remote Controller that is more suited to the ‘small screen’. If the IP address of your humax is 10.0.0.200 then the mobile version’s address would be :- http://10.0.0.200/plugin/ir/m/

There are three selectable screens that display Remote - Favs - Macros


COMMAND LINE OPTIONS


The IR package is also controllable as a command line via Telnet, here are some examples :-


humax# status Watching 7: BBC THREE - This Is BBC Three (05:30 - 18:58) [48%]

humax# ir SEVEN TWO OK

SEVEN (0x9)

TWO (0x4)

OK (0x13)

humax# status Watching 72: CITV - Horrid Henry (12:00 - 12:15) [13%]


NOTE


The Web-If Remote Controller can only control your Humax, the 'TV' 'DVD' and 'AUDIO' mode buttons will not control other equipment