Install Modified Firmware

The procedure for upgrading Humax software, (both original and modified) differs slighty for for the HDR and HD models. Please see the relevant section below.

HDR Fox T2

• Download the firmware and, if it is a zip file, extract it
• Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Drive *
• Put the unit into standby using the remote or big button on the front
• Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click)
• Plug the USB Flash Drive into a USB port
• Turn on the TV and switch to the Humax input
• Start up the Humax using the big button on the front
• The software update should begin automatically and the progress shown on the TV screen. The initial download is very quick and then programming takes 2-3 minutes
• When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
• Unplug the USB Flash Drive
• Press the big button on the front again to restart with the new firmware

HD Fox T2

• Download the firmware and, if it is a zip file, extract it
• Rename the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Drive *
• Put the unit into standby using the remote, or power button on the front
• Plug the USB Flash Drive into a USB port
• Turn on the TV and switch to the Humax input
• Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen. The initial download is very quick and then programming takes 2-3 minutes
• When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
• Unplug the USB drive
• Reconnect external hard drive
• Press the power button on the front to restart with the new firmware

To Install a Full Web Interface Continue HERE

Note: Some USB Flash Drives* are reported not to work, The reason for this is not fully understood, However the following Tips are known to help :-

• Ensure no other USB devices are connected
• Do not use a USB extender cable
• Removing all other files / re-formatting can prevent file fragmentation
• Try both USB ports (HDR)
• Last Resort, Try a different USB Flash Drive