Difference between revisions of "Install Modified Firmware"

From hummy.tv Wiki
Jump to: navigation, search
(HD Fox T2)
Line 1: Line 1:
The procedure for upgrading Humax software, (both original and modified) differs slighty for for the HDR and HD models. Please see the relevant section below.
+
The procedure for upgrading Humax software, both original and customised is detailed below.
  
 
==HDR Fox T2==
 
==HDR Fox T2==
Line 12: Line 12:
 
* The software update should begin automatically and the progress shown on the TV screen
 
* The software update should begin automatically and the progress shown on the TV screen
 
* The initial ''download'' is very quick and then programming takes 2-3 minutes
 
* The initial ''download'' is very quick and then programming takes 2-3 minutes
 +
* A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']]
 
* When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV
 
* When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV
 
* Unplug the USB Flash Drive
 
* Unplug the USB Flash Drive
Line 25: Line 26:
 
* Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
 
* Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
 
* The initial ''download'' is very quick and then programming takes 2-3 minutes
 
* The initial ''download'' is very quick and then programming takes 2-3 minutes
 +
* A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']]
 
* When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV
 
* When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV
 
* Unplug the USB Flash Drive
 
* Unplug the USB Flash Drive

Revision as of 14:46, 13 November 2011

The procedure for upgrading Humax software, both original and customised is detailed below.

HDR Fox T2

  • Download the firmware and, if it is a zip file, extract it
  • Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Drive *
  • Put the unit into standby using the remote or big button on the front
  • Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click)
  • Plug the USB Flash Drive into a USB port
  • Turn on the TV and switch to the Humax input
  • Start up the Humax using the big button on the front
  • The software update should begin automatically and the progress shown on the TV screen
  • The initial download is very quick and then programming takes 2-3 minutes
  • A list of possible Error codes that may be displayed are detailed HERE
  • When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
  • Unplug the USB Flash Drive
  • Press the big button on the front again to restart with the new firmware

HD Fox T2

  • Download the firmware and, if it is a zip file, extract it
  • Rename the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Drive *
  • Put the unit into standby using the remote, or power button on the front
  • Plug the USB Flash Drive into the USB port
  • Turn on the TV and switch to the Humax input
  • Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
  • The initial download is very quick and then programming takes 2-3 minutes
  • A list of possible Error codes that may be displayed are detailed HERE
  • When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
  • Unplug the USB Flash Drive
  • Reconnect external hard drive (if used)
  • Press the power button on the front to restart with the new firmware


To Install a Full Web Interface Continue HERE


Note Note: Some USB Flash Drives* are reported not to work, The reason for this is not fully understood, However the following Tips are known to help :-

  • Ensure no other USB devices are connected
  • Do not use a USB extender cable
  • Removing all other files / re-formatting can prevent file fragmentation
  • Try both USB ports (HDR)
  • Last Resort, Try a different USB Flash Drive