Diagnostic Utilities

From hummy.tv Wiki
Revision as of 14:34, 19 July 2015 by Ezra pound (talk | contribs)
Jump to: navigation, search

From the main Web-If menu page clicking on Diagnostics will pull up this page :-

Webif-diag.png

Run Diagnostic options (* = Also available from pull down Menu)

'general' diagnostic is the default, The following is a list of other available Diagnostic commands that can replace it :-

  • 1.03.06 = Gather information from HDR running software version 1.03.06
  • 4kalign = Run a check on your hard drive for 4K block alignment
  • arbookmarks = scan your existing recordings and set AR start/stop bookmarks to padded recordings
  • assignhd = configure a USB Drive on the HD-Fox T2 for use with the Custom Firmware
  • boot2fix = Fix some aspects of the 'General' Diagnostic
  • cpdiag = custom portal diagnostics
  • crontab = display a list of entries in the cron list
  • debugtv = Create a humaxtv.log file (Details Below)
  • diagmode = Invoke Maintenance Mode after a power cycle
  • disable_tsr = disable Time Shift Recording (while tuned to a channel which is not currently broadcasting)
  • diskattr = display disk attributes using SMART (smartmontools) data.
  • diskattrs = force a run of the nightly disk check process
  • diskfree = runs df -h /mnt/hd2 to determin the amount of free space that auto processes can use
  • dustbin/empty = force an undelete dusbin empty (note 1 - 10 day delay will still apply)
  • enable_tsr = re-enable Time Shift Recording
  • encheck = displays possible decryption failures
  • encsummary = Lists number of files that are Encrypted and Decrypted
  • epgrange* = display date range of EPG data
  • fixencflags = fixes 'file is already decrypted but the HMT flag is wrong' message. Also fixes false Dec flag
  • fix-flash-packages* = fix problems with packages that reside in Flash, required after a crash/disable. Packages affected include:- undelete, redring,ir, tmenu and rsvsync
  • fixtimestamps = set all recording's timestamps to match the time the recordings finished
  • fix-webif = forcibly remove and re-install the web-if. command line = diag fix-webif
  • flashmap = show flash memory layout
  • flatten = display flatten status information
  • force-retune = Initiate a re-tune of TV channels on the Humax after a re-boot. Note this clears recording schedule and favourites lists
  • general* = Carries out several General checks including the presents of a /mod/tmp directory
  • hdinfo = Display information for the internal Hard Disk
  • ir3/debugon = Enable remote control input to be logged in the humaxtv.log
  • ir3/debugoff = disable remote control input being logged in the humaxtv.log
  • mmreset = Reset the Multimode state database, if it exists and return "No MM state found" if it doesn't
  • plugin_autodisable/off diagnostic = Prevent a crash disabling undelete, redring and ir packages (requires multienv 1.5)
  • plugin_autodisable/on diagnostic = reverse a plugin_autodisable/off diagnostic command
  • prepare_for_upgrade* = prevent package failure during an upgrade from 1.02.20 or earlier to 1.02.27 or later (See Note 2)
  • remove_mod_yes_i_am_sure = removes all Custom Firmware, equivalent to Remove all custom firmware packages and settings option
  • remove_mod_on_next_boot = runs 'RESET_CUSTOM_FIRMWARE_ENVIRONMENT' on the next reboot
  • remove_portals = remove all installed Custom TV Portals
  • removepw = remove password authentication from the web interface
  • resetnew = globally reset the watched and unwatched recordings figures displayed against 'Media Files' folders
  • resetrma = remove the Return to Manufacturer (RMA) Mode request (diag resetrma from Telnet)
  • reset_unprotect = Forces a rescan of files to be processed using the auto unprotect package
  • reset_webif = reset the web interface settings back to the defaults
  • retune/302_to_308 = Channel 302 will be renumbered to 308 on the next boot
  • retune/kill_800 = remove all channels above 799 on next boot (Note 800 channels can be the 'good' duplicate)
  • rs/chanpush = Initiates an instant send of channel information to Remote Scheduling server
  • rs/checkin = force a Remote Schedule update with :- /mod/sbin/rs_process now
  • rs/diskpush = Initiates an instant send of 'Full' HDD inventory to Remote Scheduling server
  • rs/muxdump = runs /mod/bin/rs epg
  • rs/push = sends TBL_RESERVATION schedule and pending schedule data to RS Server
  • rs/sync = clear the local state cache and synchronise everything
  • setrma = Request a Return to Manufacturer Mode. Removes Custom Firmware after a reboot
  • sweeper/test = Forces a sweep and displays a result for each line in the sweep file
  • sysmon/purge = clear the sysmon database
  • vdftest* = force all segments of display to 'on' for 30 seconds, followed by blank (normal display returns after standby)
  • wireless = install wireless-tools and run iwconfig wlan0 to display wireless (dongle) parameters


Notes

1) The above diagnostics commands can also be run from a Telnet Command line e.g.

diag prepare_for_upgrade

2) Some packages need to store files in flash rather than on the disk so that they are available before the Humax software starts. Upgrades to 1.02.27 or later can overwrite these flash locations. Prepare_for_upgrade stores copies of the custom files in another flash location so that they can be automatically restored later. (See fix-flash-packages for problems with redring, undelete, portal-xtra1, ir etc)

3) To view the content of a diagnostic option enter e.g. http://hummypkg.org.uk/diag/boot2fix

View Log Files

Opens a viewing screen where it is possible to display the last 5000 lines of any of the available log files, You can select the number of lines contained in each page from 50,100, 200 or 500 and select a page (where page 1 is the most recent). There are also the following options:-

  • Highlight = Enter keywords for text to be displayed with a Yellow background
  • Reload = regenerate the displayed text
  • Clear Log = Remove all text from the selected log file
  • Search Log = Display only lines containing keyword text


Force Reinstall

Enter the name of an installed package here to force a re install in order to fix a problem with it.


File Editor

OPEN, SAVE, REVERT, CREATE FILE options allow you to navigate to a text readable file and edit it. There are also some commonly used files listed, e.g. :-

  • /mod/etc/anacrontab
  • /mod/var/spool/cron/crontabs/root
  • /mod/boot/ir3.map


Database Browser

This option allows the used to display the contents of the various *.db database files generated by the Humax from a database 'Menu' it is not possible at present to point that viewer at a file not in the database menu

List of viewable databases HERE


Hard Disk

HDD1.png
HDD2.png
HDD3.png

This option displays various tables with information about the internal hard disk drive, as follows :-



  • Disk Information . . . Click on Picture to view detail >>



  • Attributes . . . Click on Picture to view detail >>

Note :- Please ignore Line 190, is not supported on the Humax


  • Self-Test Logs . . . Click on Picture to view detail >>


Channel Information

This option displays information showing the channels the tuner has found Details Here


Disk Space

Disk-util.png

Click on Picture to view detail >>

This option (also available from the pie chart on all Web-If screens), displays the utilisation of the internal hard disk


DLNA Server

DLNA.png

Click on Picture to view detail >>

This option allows the Status of the DLNA server to be viewed, there is also an option to Reset The DLNA database, the reset option is used in conjunction with Menu >> Settings >> System >> Internet Settings >> Content Sharing = On/Off, i.e. Content Sharing = Off >> Reset DLNA database >> Content Sharing = On


humaxtv.log

This is a general events log file that resides in /var/log/humaxtv.log, It is not generated from default. To enable the log run Web-If >> Diagnostics >> degubtv or via the command line enter :-

touch /var/lib/humaxtv/mod/debugtv HIDE Turn logging on

rm /var/lib/humaxtv/mod/debugtv HIDE Turn logging off

To view the log file via the WebIf, Click on Diagnostics from the Main Menu and then select View Log Files >> humaxtv.log

humax# cd /var/log
humax# cat humaxtv.log
-------------------------------------
Initialising Dustbin v1.0
Dustbin debug: 0
Dustbin media root: /mnt/hd2/My Video/
Dustbin path: /mnt/hd2/My Video/[Deleted]
-------------------------------------
route: SIOCADDRT: File exists
DRV_DSC_Init_Begin
SIOCDELRT failed , ret->-1
OCON | initialising controller
Restore reminders from file failed
Persist reminders to file failed

GALIO STARTING
./humaxtv --alt-config /usr/browser/config-ocontroller-si-rootfs.txt --config /var/lib/humaxtv/galio-config.txt
User opts: None
IP Address List: 10.0.0.200
mxDLNA [DLNA DMS DmsRunThread] Start (PID:166   TID:1067660496).......
[mxDlnaFileScanner_create] +++++
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_create] -----
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[ifss_start] +++++
humax#