WebIf Remote Controller
The IR package adds a fully functioning Remote Controller to the Web-Interface, It can be installed from the Web-If >> Package Management page and once installed a ‘Remote’ icon will be added to the Web-If Main screen
CHANNEL SHORTCUTS
Change
- allow quick selection of a new TV/Radio station from a list
Customise
- Add/Remove Favourite quick select channel Icons
- Block remote control mode change icons on TV
- Swap INFO and LIST commands
- Disable Volume Control
- Use Custom Map File
Note the custom map file must be named /mod/boot/ir3.map and be of the form <original keycode>:<replacement keycode>:<comment> e.g. To swap VOL+ & VOl- as well as disable MUTE, the map file would look like:
1f:40:VOL+ 40:1f:VOL- 18::MUTE
Use ir -l to show code mappings.
- Select an alternative Remote Control Mode (1-6)
Also available in Web-If >> Settings >> Remote Control Settings
If you have forgotten which mode your original Remote Control is in, holding 0 + OK for 5 Seconds will reveal it on your TV screen
MACROS
- record a sequence of key strokes, to be replayed with a single 'click'
Selecting Record a New Macro will display a Name Box and some delay keys to create a pause in the sequence
HISTORY
Displays a clearable list of commands sent
MOBILE VERSION
There is a mobile version of the Web-If Remote Controller that is more suited to the ‘small screen’. If the IP address of your humax is 10.0.0.200 then the mobile version’s address would be :- http://10.0.0.200/plugin/ir/m/
There are three selectable screens that display Remote - Favs - Macros
COMMAND LINE OPTIONS
The IR package is also controllable as a command line via Telnet, here are some examples :-
humax# status
Watching 7: BBC THREE - This Is BBC Three (05:30 - 18:58) [48%]
humax# ir SEVEN TWO OK
SEVEN (0x9)
TWO (0x4)
OK (0x13)
humax# status Watching 72: CITV - Horrid Henry (12:00 - 12:15) [13%]
NOTE
The Web-If Remote Controller can only control your Humax, the 'TV' 'DVD' and 'AUDIO' mode buttons will not control other equipment
