Diagnostic Utilities

From hummy.tv Wiki
Revision as of 18:02, 4 September 2012 by Ezra pound (talk | contribs)
Jump to: navigation, search

From the main Web-If menu page clicking on Diagnostics will pull up this page :-

Webif-diag.png

Run Diagnostic options

'general' diagnostic is the default and clicking on Run Diagnostic will result in the display above, The following is a list of other available Diagnostic commands that can replace 'general' :-

  • boot2fix = Fix some aspects of the 'General' Diagnostic
  • assignhd = configure a USB Drive on the HD-Fox T2 for use with the Custom Firmware
  • diskpush = Initiates an instant Remote Scheduling scan / update
  • cpdiag = custom portal diagnostics
  • flashmap = show flash memory layout
  • disable_tsr = disable Time Shift Recording (while tuned to a channel which is not currently broadcasting)
  • enable_tsr = re-enable Time Shift Recording
  • removepw = remove password authentication from the web interface
  • remove_mod_yes_i_am_sure = removes all Custom Firmware
  • prepare_for_upgrade = prevent package failure during an upgrade from 1.02.20 to 1.02.28 (See Note 2)
  • reset_webif = reset the web interface settings back to the defaults
  • reset_unprotect = Forces a rescan of files to be processed using the auto unprotect package
  • remove_portals = remove all installed Custom TV Portals
  • fix-flash-packages = fix problems caused by not running prepare_for_upgrade

Notes

1) The above diagnostics commands can also be run from a Telnet Command line e.g.

diag prepare_for_upgrade

2) Some packages need to store files in flash rather than on the disk so that they are available before the Humax software starts. Humax upgrades can overwrite these flash locations (1.02.27 & 1.02.28 overwrite the flash area that contains Sky Player). Prepare_for_upgrade stores copies of the custom files in another flash location so that they can be automatically restored later. (See fix-flash-packages for problems with redring, undelete, portal-xtra1 etc)


Force Reinstall

Enter the name of an installed package here to force a re install in order to fix a problem with it.


humaxtv.log

This is a general events log file that resides in /var/log/humaxtv.log, It is not generated from default

touch /mod/boot/debugtv HIDE Turn logging on

rm /mod/boot/debugtv HIDE Turn logging off

To view the log file via the WebIf, Click on Diagnostics from the Main Menu and then click on Logfile >> humaxtv.log

humax# cd /var/log
humax# cat humaxtv.log
-------------------------------------
Initialising Dustbin v1.0
Dustbin debug: 0
Dustbin media root: /mnt/hd2/My Video/
Dustbin path: /mnt/hd2/My Video/[Deleted]
-------------------------------------
route: SIOCADDRT: File exists
DRV_DSC_Init_Begin
SIOCDELRT failed , ret->-1
OCON | initialising controller
Restore reminders from file failed
Persist reminders to file failed

GALIO STARTING
./humaxtv --alt-config /usr/browser/config-ocontroller-si-rootfs.txt --config /var/lib/humaxtv/galio-config.txt
User opts: None
IP Address List: 10.0.0.200
mxDLNA [DLNA DMS DmsRunThread] Start (PID:166   TID:1067660496).......
[mxDlnaFileScanner_create] +++++
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_create] -----
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[ifss_start] +++++
humax#