Diagnostic Utilities
From the main Web-If menu page clicking on Diagnostics will pull up this page :-
'general' diagnostic is the default and clicking on Run Diagnostic will result in the display above, The following is a list of other available Diagnostic commands that can replace 'general' :-
- boot2fix = Fix some aspects of the 'General' Diagnostic
- assignhd = configure a USB Drive on the HD-Fox T2 for use with the Custom Firmware
- diskpush = Initiates an instant Remote Scheduling scan / update
- cpdiag = custom portal diagnostics
- flashmap = show flash memory layout
- disable_tsr = disable Time Shift Recording (while tuned to a channel which is not currently broadcasting)
- enable_tsr = re-enable Time Shift Recording
- removepw = remove password authentication from the web interface
- remove_mod_yes_i_am_sure = removes all Custom Firmware
- prepare_for_upgrade = prevent package failure during an upgrade from 1.02.20 to 1.02.28 (See Note 2)
- reset_webif = reset the web interface settings back to the defaults
- reset_unprotect = Forces a rescan of files to be processed using the auto unprotect package
- remove_portals = remove all installed Custom TV Portals
- fix-flash-packages = fix problems caused by not running prepare_for_upgrade
Notes
1) The above diagnostics commands can also be run from a Telnet Command line e.g.
diag prepare_for_upgrade
2) Some packages need to store files in flash rather than on the disk so that they are available before the Humax software starts. Humax upgrades can overwrite these flash locations (1.02.27 & 1.02.28 overwrite the flash area that contains Sky Player). Prepare_for_upgrade stores copies of the custom files in another flash location so that they can be automatically restored later. (See fix-flash-packages for problems with redring, undelete, portal-xtra1 etc)
humaxtv.log
This is a general events log file that resides in /var/log/humaxtv.log, It is not generated from default
touch /mod/boot/debugtv HIDE Turn logging on
rm /mod/boot/debugtv HIDE Turn logging off
To view the log file via the WebIf, Click on Diagnostics from the Main Menu and then click on Logfile >> humaxtv.log
humax# cd /var/log humax# cat humaxtv.log ------------------------------------- Initialising Dustbin v1.0 Dustbin debug: 0 Dustbin media root: /mnt/hd2/My Video/ Dustbin path: /mnt/hd2/My Video/[Deleted] ------------------------------------- route: SIOCADDRT: File exists DRV_DSC_Init_Begin SIOCDELRT failed , ret->-1 OCON | initialising controller Restore reminders from file failed Persist reminders to file failed GALIO STARTING ./humaxtv --alt-config /usr/browser/config-ocontroller-si-rootfs.txt --config /var/lib/humaxtv/galio-config.txt User opts: None IP Address List: 10.0.0.200 mxDLNA [DLNA DMS DmsRunThread] Start (PID:166 TID:1067660496)....... [mxDlnaFileScanner_create] +++++ [mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED [mxDlnaFileScanner_create] ----- [mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED [mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED [mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED [ifss_start] +++++ humax#