Telnet

Telnet is one of the network protocols which can be used to gain command line interface (CLI) access to a Humax PVR running customised firmware. As the firmware has matured it has become less necessary to use telnet but there are still cases where command line access is essential to troubleshoot or fix an issue.

In order to gain access to your Humax via telnet, you will need a piece of software called a telnet client installed on a computer on the same network as the Humax. You will also need to know or determine the IP address of your Humax; the easiest way to determine this is to use the on-screen menus and navigate to Settings->System->Internet Setting->Configure LAN. The IP address is shown on the second line.

=== Connecting from a Windows Computer

=== Connecting from a MacOSX Computer