Install Modified Firmware

From hummy.tv Wiki
Revision as of 17:29, 15 August 2011 by Ezra pound (talk | contribs) (Created page with "The procedure for upgrading Humax software, (both original and Modified) is as follows :- - Power OFF the product using the rear ON/OFF switch - Download the software and save ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The procedure for upgrading Humax software, (both original and Modified) is as follows :-

- Power OFF the product using the rear ON/OFF switch

- Download the software and save on a USB Pen drive

- Make sure the filename is hdr_fox_t2_upgrade.hdf

- Insert the USB Pen drive directly into the front or rear USB port

- Power ON the product using the rear ON/OFF switch

- The download should start and the download progress should appear on the TV set

- When the update is complete End will appear on the front display, "Download Successful will appear on the TV.

- Remove USB Pen and press standby

Notes:

During the update process DO NOT power off the product

USB Pen must be formatted in FAT32

The software must be on the root directory of the USB Pen drive (e.g. not in a sub-folder)

Try the other USB port if the first doesn't start upgrade

Not all USB Pens will be recognised, try a different USB Pen

Retrieved from "https://wiki.hummy.tv/w/index.php?title=Install_Modified_Firmware&oldid=27"