Change Media Server Name

If you have more than one Humax HDR Fox-T2 on the same network and use the Content Sharing (DLNA Server) feature, you may wish to change the name that they use to advertise themselves on the network. The following instructions take you through the process of modifying a customised firmware update file to change the name. The commands are all run on the Humax itself.

Gain telnet access to your Humax command prompt

Follow the instructions on this page

Once you have connected to the Humax command line then you will see a prompt that looks like

humax#

The commands in the following sections show this prompt for context but you should not type it. The command that you need to type will be shown in bold whereas the prompt and other output that you will see is shown in normal font.

Install the required packages

This process uses several packages which may not already be installed on your Humax:

• humidify
• squashfs-tools
• bsed

Since you're already at the command prompt, you can just install them using the opkg command:

humax# opkg install humidify squashfs-tools bsed

Insert a USB Flash drive containing the firmware update

Put the customised firmware update file onto a USB flash drive, just as you would to apply the update, and plug it into your Humax. Just as with an update, the firmware bundle should be the only thing on the disk. Since the Humax is already turned on, it will not try and apply the update. If your TV is turned on and the Humax input is selected then the screen may show the loading USB and Video/Music/Photo/Copy box. This can be dismissed with the Exit button or just ignored until it times out.

Unless you have any other drives connected, this USB flash drive will now be mounted into the Humax filesystem as /media/drive1. Change into that directory and list the contents:

humax# cd /media/drive1
humax# ls
HDR_FOX_T2_upgrade.hdf

Unpacking the firmware bundle

Unpack the firmware bundle using humidify. This takes around 30 seconds.

humax# humidify -x HDR_FOX_T2_upgrade.hdf
HDF Tool v1.0.2, by af123, 2011.

Opening HDR_FOX_T2_upgrade.hdf, 17176677 bytes.

  Blocks:     527
  Model:      4
  System ID:  80bc.7e00  

x  1.hdfbin-1-000000.raw          (17223680 bytes)

Processed in: 22.97s
humax# ls
1.hdfbin-1-000000.raw   HDR_FOX_T2_upgrade.hdf

There are now two files on the USB drive.

Extract the file system

Extract the filesystem using unsquashfs. This takes around 5 seconds.

humax# unsquashfs -d /mod/tmp/firmware 1.hdfbin-1-000000.raw

created 1383 files
created 124 directories
created 144 symlinks
created 200 devices
created 0 fifos

and change directory to the location of the extracted firmware.

humax# cd /mod/tmp/firmware
humax# ls
bin    etc    lib    mnt    opt    root   share  tmp    var
dev    home   media  mod    proc   sbin   sys    usr

Change the media server name

Choose a new name for your media server which is exactly 12 characters long (the length of the original Media Server). You can add spaces to the end if you don't need all the characters. Run the bsed command to modify the Humax binary and replace the standard name with yours. The example here just changes it to Media Serve2

humax# bsed -v -1 usr/bin/humaxtv "Media Server" "Media Serve2"

Re-pack the filesystem

Change directory back to the flash drive and rebuild the filesystem using squashfs. This takes up to a minute.

humax# cd /media/drive1
humax# mksquashfs /mod/tmp/firmware 1.hdfbin-1-000000.raw -le -all-root -noappend
Parallel mksquashfs: Using 1 processor
Creating little endian 3.0 filesystem on 1.hdfbin-1-000000.raw, block size 65536.

Little endian filesystem, data block size 65536, compressed data, compressed metadata, compressed fragments
Filesystem size 16819.80 Kbytes (16.43 Mbytes)
       44.73% of uncompressed filesystem size (37602.17 Kbytes)
Inode table size 17944 bytes (17.52 Kbytes)
       31.14% of uncompressed inode table size (57615 bytes)
Directory table size 18381 bytes (17.95 Kbytes)
       42.25% of uncompressed directory table size (43501 bytes)
Number of duplicate files found 19
Number of inodes 1851
Number of files 1383
Number of fragments 141
Number of symbolic links  144
Number of device nodes 200
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 124
Number of uids 1
       root (0)
Number of gids 0

Remove the temporary filesystem

humax# rm -rf /mod/tmp/firmware

Rebuild the firmware bundle

The last step is to rebuild the firmware bundle using the new filesystem file. This takes just over a minute.

humax# humidify -c HDR_FOX_T2_upgrade.hdf 80bc.7e00 1.hdfbin-1-000000.raw
HDF Tool v1.0.2, by af123, 2011.

Adding 1.hdfbin-1-000000.raw (17223680 bytes)...  0.31% compression

Processed in: 65.90s

Flash the new firmware image

Install the modified firmware image as normal and your media server should be renamed!