Remote Scheduling

What is the Remote Scheduling Portal?

It's a web site which enables you to manage your list of scheduled recordings while you're out and about, from anywhere with a web browser and Internet connection, without having to expose your Humax device to the Internet or leave it powered on. As long as your Humax has Internet access and wakes up occasionally to check for updates or make a recording, it will work.

Getting Started

If you are not already running the Customised Firmware then please have a look at the Wiki and Black Hole's threads at the top of the http://hummy.tv Forum which cover how to get started and ready to move on.

• Make sure you're running at least version 1.11 of the Customised Firmware (see Firmware Downloads;)
• Install the latest webif and rs packages;
• See Wireless Users Notes Below if you are connected via Wi-Fi
• Go to the Settings page in your device's local web interface and register with the remote scheduling service;
• Wait for your initial password to arrive via email;
• Access http://rs.hummypkg.org.uk/ and accept the terms and conditions to get started.

When you first log in there is some important information regarding what the site will and won't do and general Terms & Conditions to agree to before you can proceed.

This gets you to the Home Screen which, to begin with, will show you the existing schedule details from your Hummy. There's also the Home button to return to this screen, Settings and Logout buttons. Plus there is the EPG button - click this to see the EPG which will look and feel much the same as that already on the web interface.

Clicking on the Pie Chart from any screen will allow you to Manage your Recordings

Clicking on a programme in the Top 10/30 list will display all broadcast times for that programme with the ability to set up a recording from there

Frequency of wake-up

To have the best chance of being able to successfully schedule a recording, you should set your Humax to wake up at least once a day which is most easily done through the on-screen menus at Settings->Preferences->Time, see the screenshot on the right.

In conjunction with the overnight update check, this ensures that your device checks for new recordings at least twice a day. Any recordings that you have set will also enable the Humax to check for updates.

It is also possible to schedule additional wake-up/sleep periods via the RS portal using the Additional Commands option which is below the list of scheduled recordings. You may wish to do this when going away from home for an extended period for example.

New Terms

rs package 

The remote scheduling program that runs on your Humax box (which needs to be running the Customised Firmware including the Web Interface package)

http://rs.hummypkg.org.uk/ 

The Remote Scheduling website that captures your schedule requirements and synchronises them to your box at home.

Scheduling a Recording

Go into the EPG screen. Peruse the channel listings, you can click on a channel name to see the full line up for that channel. Alternatively you can use the Search or click on the down arrow to search by genre.

There is a more detailed section on searching here Searching the EPG

Click on the Programme Name that you want to schedule and you will get a dialogue box with more detailed programme info, plus buttons at the bottom to record the series, just the program, or cancel.

Once this is done the Home screen will now show a section at the top called Queued Commands - at this stage these are only stored on the website awaiting a sync with your Humax. Every 10 - 12 minutes or so (or on next reboot if the box is on standby) your box will contact the site to see if there is anything to sync and if there are items in Queued Commands they will be picked up and copied over to your Humax, and then they will appear in a Pending list. There is a 'last seen' time/date stamp at the top of the Home Page so you know if the site is seeing your box.

Please note that due to the way the core Humax software works a restart of the box is then required in order for Pending items to actually take place. This is why items in the Queued Commands list also have a button for "Schedule Reboot" - if you click this a reboot command is also sent to the Humax box along with your recordings, and the box will restart itself shortly after synchronising the Queued Commands thus ensuring your recordings/changes take place.

All boxes have an auto update task at 4:30 am every morning so at worst case they wake up every morning and any Pending Items already on the box will become active. Otherwise if you have the box on standby when you are not there you may want to schedule a power cycle or two so that the box wakes up and can pick up any Queued and/or Pending items and incorporate them fully into the schedule (there is a function for this under Additional Commands)

You can force a sync from the command line with :-

/mod/sbin/rs_process now

To push the schedule from the command line use :-

rs push

Don't forget that if you have the box on standby when you make the schedule then it'll need one wake up to pick up the scheduled item(s), then another in order to successfully incorporate them into the schedule on the Humax. You can send the second re-boot along with the schedule but the first has to already be defined on the box (either the built in daily 4:30am auto update or wake up/sleep cycles you can program yourself).

Queued Commands

These are the things you have done on the web site. Set recordings, deleted schedules. At this stage they are only held on the website until the next 5 minute 'sweep' or your Hummy wakes up and check the site.

Deleting Queued Items

You'll notice the Queued items list has a trashcan icon at the end of each line and this will remove the item from the Queue and therefore wont sync with your Hummy.

Scheduled Events on Humax

Pending 

The Humax knows about these items, but it needs a reboot in order to save them into the schedule list on the box so that they actually work as expected.

Active 

These are all the items the Humax knows about AND will carry them out in full.

Deleting Scheduled Items

(i.e. those already synchronised onto the Humax schedule or in the Pending List)

I will refer to items in the Active list but this works just the same for items in the Pending List.Click on the item in the Active list on the home page, and choose the 'Cancel Event' option. This will create a cancellation line in the Queued Commands list and will wait for the next sync between the site and your box.

Just like setting a recording the cancellation item will then sit in the Pending Queue on the box until a restart takes place hence you can also send along a reboot action with the cancellation just like you can with a new recording. BUT like setting a recording, if your box is in standby it needs to wake up in order to sync. in the first place. Less of a worry when deleting items as it's no problem to record something you now don't want anymore.

Additional Commands

This is found at the end of the Active list on the main page. In here you can set up a wake up/sleep event. You can use these to periodically wake the box up to check for any new actions from the website and put it back in standby afterwards. These are separate to the automatic on/off times that you can program from the on screen menus of the Humax's 'settings' menu in that you can define multiple wake/sleep events, although along with the built in early morning wake up you may only need 1 or 2 more per day.

Recent Activity

This is a simple view of an event log - it's not meant to be an exhaustive audit trail but it does confirm that things are happening and when they happened. You can see a more detailed list of every event tracked by clicking the More button and then even more detail via the Diagnostic Entries button.

Searching the EPG

This functionality is still being refined but it is possible to do some more complex searches i.e. for more than one search term.

You can use the following operators and rules to refine/enhance the search results

  + stands for AND
  - stands for NOT
  [no operator] implies OR
  "two words" in quotes must appear together
  +doctor +(amy tardis) - containing 'doctor' and one of 'amy' or 'tardis'.

Managing Your Recordings

Clicking in the 'Pie Chart' symbol in any screen will pull up a screen showing your recordings, From here it is possible to setup a Delete proceedure that will be carried out the next time your Humxax is in contact with the RS server

Related Links

• RS Automatic Scheduling

• RS Multi-mode Recording

Notes

Wireless Users

If your Humax is usually connected to your network via wireless, then it will not connect to the wireless network when it wakes up to make a recording. You can install the WIRELESS HELPER package to change this behaviour and increase the opportunities for your Humax to check for new recordings.

The wireless-helper package currently only supports wireless networks using WPA or WPA2. It is planned to extend support to at least WEP in a future release.