Install Modified Firmware

The procedure for upgrading Humax software, (both original and modified) differs slighty for for the HDR and HD models.

HDR Fox T2

Download the firmware and, if it is a zip file, extract it;
Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
Put the unit into standby using the remote or big button on the front;
Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click);
Plug the USB disk into the front or rear USB port;
Turn on the TV and switch to the Humax input;
Start up the Humax using the big button on the front;
The software update should begin automatically and the progress shown on the TV screen;
When the update is complete End will appear on the front display and Download Successful will appear on the TV;
Press the big button on the front again to restart with the new firmware.

Download the firmware and, if it is a zip file, extract it;
Rename the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
Put the unit into standby using the remote and then physically unplug the device from the mains;
Plug the USB disk into the rear USB port, first unplugging any connected hard drive;
Turn on the TV and switch to the Humax input;
Connect the Humax to the mains;
The software update should begin automatically and the progress shown on the TV screen;
When the update is complete End will appear on the front display and Download Successful will appear on the TV.