Install Modified Firmware

The procedure for upgrading Humax software, (both original and Modified) differs slighty for for the HDR and HD models.

HDR Fox T2

• Download the firmware and, if it is a zip file, extract it;
• Name the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
• Put the unit into standby using the remote or big button on the front;
• Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click).
• Plug the USB disk into the front or rear USB port;
• Turn on the TV and switch to the Humax input;
• Start up the Humax using the big button on the front;
• The software update should begin automatically and the progress shown on the TV screen.
• When the update is complete End will appear on the front display and Download Successful will appear on the TV.

HD Fox T2

• Download the firmware and, if it is a zip file, extract it;
• Name the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
• Put the unit into standby using the remote and then physically unplug the device from the mains;
• Plug the USB disk into the rear USB port, first unplugging any connected hard drive;
• Turn on the TV and switch to the Humax input;
• Connect the Humax to the mains;
• The software update should begin automatically and the progress shown on the TV screen.
• When the update is complete End will appear on the front display and Download Successful will appear on the TV.