Difference between revisions of "Install Modified Firmware"
Ezra pound (talk | contribs) |
Ezra pound (talk | contribs) (→HD Fox T2) |
||
| Line 19: | Line 19: | ||
==HD Fox T2== | ==HD Fox T2== | ||
| + | * NOTE :- The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be installed when operating with Custom Firmware | ||
* [[Firmware_Downloads | '''Download the firmware''']] and, if it is a zip file, extract it | * [[Firmware_Downloads | '''Download the firmware''']] and, if it is a zip file, extract it | ||
| − | * Rename the resulting file as ''HD_FOX_T2_Upgrade.hdf'' and place it in the root of a FAT32 formatted USB Flash | + | * Rename the resulting file as ''HD_FOX_T2_Upgrade.hdf'' and place it in the root of a FAT32 formatted USB Flash Device * |
* Put the unit into standby using the remote, or power button on the front | * Put the unit into standby using the remote, or power button on the front | ||
| − | * Plug the USB Flash | + | * Plug the USB Flash device into the USB port |
* Turn on the TV and switch to the Humax input | * Turn on the TV and switch to the Humax input | ||
* Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen | * Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen | ||
| Line 28: | Line 29: | ||
* A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']] | * A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']] | ||
* When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV | * When the update is complete End will appear on the front display and ''Success Downloading!'' will appear on the TV | ||
| − | * Unplug the USB Flash | + | * Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf then |
| − | * Reconnect | + | * Reconnect the USB device |
* Press the power button on the front to restart with the new firmware | * Press the power button on the front to restart with the new firmware | ||
Revision as of 17:46, 20 November 2011
The procedure for upgrading Humax software, both original and customised (Modified) is detailed below.
HDR Fox T2
- Download the firmware and, if it is a zip file, extract it
- Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Drive *
- Put the unit into standby using the remote or big button on the front
- Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click)
- Plug the USB Flash Drive into a USB port
- Turn on the TV and switch to the Humax input
- Start up the Humax using the big button on the front
- The software update should begin automatically and the progress shown on the TV screen
- The initial download is very quick and then programming takes 2-3 minutes
- A list of possible Error codes that may be displayed are detailed HERE
- When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
- Unplug the USB Flash Drive
- Press the big button on the front again to restart with the new firmware
HD Fox T2
- NOTE :- The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be installed when operating with Custom Firmware
- Download the firmware and, if it is a zip file, extract it
- Rename the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Flash Device *
- Put the unit into standby using the remote, or power button on the front
- Plug the USB Flash device into the USB port
- Turn on the TV and switch to the Humax input
- Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
- The initial download is very quick and then programming takes 2-3 minutes
- A list of possible Error codes that may be displayed are detailed HERE
- When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
- Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf then
- Reconnect the USB device
- Press the power button on the front to restart with the new firmware
To Install a Full Web Interface Continue HERE
Note:
Some USB Flash Drives* are reported not to work, The reason for this is not fully understood, However the following Tips are known to help :-
- Ensure no other USB devices are connected
- Do not use a USB extender cable
- Removing all other files / re-formatting can prevent file fragmentation
- Try both USB ports (HDR)
- Last Resort, Try a different USB Flash Drive
