Difference between revisions of "Install Modified Firmware"
(→HDR Fox T2) |
|||
Line 11: | Line 11: | ||
* Start up the Humax using the big button on the front; | * Start up the Humax using the big button on the front; | ||
* The software update should begin automatically and the progress shown on the TV screen; | * The software update should begin automatically and the progress shown on the TV screen; | ||
− | * When the update is complete End will appear on the front display and ''Download Successful'' will appear on the TV. | + | * When the update is complete End will appear on the front display and ''Download Successful'' will appear on the TV; |
+ | * Press the big button on the front again to restart with the new firmware. | ||
==HD Fox T2== | ==HD Fox T2== |
Revision as of 13:14, 16 August 2011
The procedure for upgrading Humax software, (both original and modified) differs slighty for for the HDR and HD models.
HDR Fox T2
- Download the firmware and, if it is a zip file, extract it;
- Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
- Put the unit into standby using the remote or big button on the front;
- Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click);
- Plug the USB disk into the front or rear USB port;
- Turn on the TV and switch to the Humax input;
- Start up the Humax using the big button on the front;
- The software update should begin automatically and the progress shown on the TV screen;
- When the update is complete End will appear on the front display and Download Successful will appear on the TV;
- Press the big button on the front again to restart with the new firmware.
HD Fox T2
- Download the firmware and, if it is a zip file, extract it;
- Rename the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
- Put the unit into standby using the remote and then physically unplug the device from the mains;
- Plug the USB disk into the rear USB port, first unplugging any connected hard drive;
- Turn on the TV and switch to the Humax input;
- Connect the Humax to the mains;
- The software update should begin automatically and the progress shown on the TV screen;
- When the update is complete End will appear on the front display and Download Successful will appear on the TV.