Difference between revisions of "Install Modified Firmware"
(→HDR Fox T2) |
|||
| Line 4: | Line 4: | ||
* Download the firmware and, if it is a zip file, extract it; | * Download the firmware and, if it is a zip file, extract it; | ||
| − | * | + | * Rename the resulting file as ''HDR_FOX_T2_Upgrade.hdf'' and place it in the root of a FAT32 formatted USB Disk (flash or externally powered); |
* Put the unit into standby using the remote or big button on the front; | * Put the unit into standby using the remote or big button on the front; | ||
* Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click). | * Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click). | ||
Revision as of 13:13, 16 August 2011
The procedure for upgrading Humax software, (both original and modified) differs slighty for for the HDR and HD models.
HDR Fox T2
- Download the firmware and, if it is a zip file, extract it;
- Rename the resulting file as HDR_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
- Put the unit into standby using the remote or big button on the front;
- Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click).
- Plug the USB disk into the front or rear USB port;
- Turn on the TV and switch to the Humax input;
- Start up the Humax using the big button on the front;
- The software update should begin automatically and the progress shown on the TV screen.
- When the update is complete End will appear on the front display and Download Successful will appear on the TV.
HD Fox T2
- Download the firmware and, if it is a zip file, extract it;
- Name the resulting file as HD_FOX_T2_Upgrade.hdf and place it in the root of a FAT32 formatted USB Disk (flash or externally powered);
- Put the unit into standby using the remote and then physically unplug the device from the mains;
- Plug the USB disk into the rear USB port, first unplugging any connected hard drive;
- Turn on the TV and switch to the Humax input;
- Connect the Humax to the mains;
- The software update should begin automatically and the progress shown on the TV screen.
- When the update is complete End will appear on the front display and Download Successful will appear on the TV.
