Diagnostic Utilities

From the main Web-If menu page clicking on Diagnostics will pull up this page :-

'general' diagnostic is the default and clicking on Run Diagnostic will result in the display above, The following is a list of other available Diagnostic commands that can replace 'general' :-

• boot2fix = Fix some aspects of the 'General' Diagnostic
• assignhd = configure a USB Drive on the HD-Fox T2 for use with the Custom Firmware
• diskpush = Initiates an instant Remote Scheduling scan / update
• cpdiag = custom portal diagnostics
• flashmap = show flash memory layout
• disable_tsr = disable Time Shift Recording (while tuned to a channel which is not currently broadcasting)
• enable_tsr = re-enable Time Shift Recording
• removepw = remove password authentication from the web interface
• remove_mod_yes_i_am_sure = removes all Custom Firmware
• prepare_for_upgrade = prevent package failure due to upgrade of 1.02.20 to 1.02.27
• remove_portals = remove all installed Custom TV Portals

Note The above diagnostics commands can also be run from a Telnet Command line e.g.

diag prepare_for_upgrade

humaxtv.log

This is a general events log file that resides in /var/log/humaxtv.log, It is not generated from default

touch /mod/boot/debugtv HIDE Turn logging on

rm /mod/boot/debugtv HIDE Turn logging off

To view the log file via the WebIf, Click on Diagnostics from the Main Menu and then click on Logfile >> humaxtv.log

humax# cd /var/log
humax# cat humaxtv.log
-------------------------------------
Initialising Dustbin v1.0
Dustbin debug: 0
Dustbin media root: /mnt/hd2/My Video/
Dustbin path: /mnt/hd2/My Video/[Deleted]
-------------------------------------
route: SIOCADDRT: File exists
DRV_DSC_Init_Begin
SIOCDELRT failed , ret->-1
OCON | initialising controller
Restore reminders from file failed
Persist reminders to file failed

GALIO STARTING
./humaxtv --alt-config /usr/browser/config-ocontroller-si-rootfs.txt --config /var/lib/humaxtv/galio-config.txt
User opts: None
IP Address List: 10.0.0.200
mxDLNA [DLNA DMS DmsRunThread] Start (PID:166   TID:1067660496).......
[mxDlnaFileScanner_create] +++++
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_create] -----
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[mxDlnaFileScanner_addDirectory] SEARCH_LIST_PATH_EXACT_MATCHED
[ifss_start] +++++
humax#