Firmware Error Codes - Revision history

Ezra pound at 19:17, 11 February 2015

2015-02-11T19:17:25Z

2012-12-04T12:35:31Z

2012-12-04T12:23:41Z

2012-12-04T12:18:23Z

2012-07-03T17:06:36Z

2011-11-26T15:54:47Z

2011-11-26T15:17:54Z

2011-11-26T15:12:24Z

2011-11-26T15:04:31Z

2011-11-26T12:10:42Z

@@ Line 92: / Line 92: @@
 This may be displayed for many reasons they include :-
-* Unexpected system parameters on your Humax unit due to testing of Beta software or incorrect factory settings, Expect to find:- Loader Version = a7.30 for the HDR and L7.27 for the HD or later,  System ID = 80BC.7E00 for the HDR and 806c.7000 for the HD, MAC address (first 6 digits) = 000378 or DCD321
+* Unexpected system parameters on your Humax unit due to testing of Beta software or incorrect factory settings, Expect to find:- Loader Version = a7.30 for the HDR and L7.27 for the HD or later,  System ID = 80BC.7E00 for the HDR and 806c.7000 for the HD, MAC address (first 6 digits) = 000378, DCD321 or 08EB74.
 * Corrupted HDF File
 * Bad communication to USB device

@@ Line 24: / Line 24: @@
 | Incorrect Application Size
 | Incorrect / Corrupted HDF
 |-
 | E-dC
 | Incorrect Data Block (CRC-16)
 | Software Damaged, Retry or Replace
 |-
 | E-FE
@@ Line 41: / Line 53: @@
 | Flash Memory Fault, Retry or Replace STB
 |-
-| E-HC/bC
+| E-HC
 | Incorrect Header Block (CRC-16)
 | Software Damaged, Retry or Replace
@@ Line 50: / Line 62: @@
 |-
 | E-HW
-| Incorrect Hardware
+| Hardware Error
 | Retry after a Set to Factory Default
 |-
-| E-Hn/bF
+| E-Hn
 | Invalid HDF Version
 | Incorrect Version, See Note 1
@@ Line 61: / Line 73: @@
 | Incorrect Version, See Note 1
 |-
-| E-It/Et
+| E-It
 | EEPROM Program Time Out
 | EEPROM Memory Fault, Retry or Replace STB

@@ Line 48: / Line 48: @@
 | Invalid HDF Format
 | HDF File has been incorrectly produced
 |-
 | E-Hn/bF

@@ Line 5: / Line 5: @@
 {| border="1"
 |-
-! width="50"|Error Code
+! width="60"|Error Code
 ! width="200"|Description
 ! width="280"|Explanation / Fix
 |-
 | E-AC
 | Incorrect Application CRC-32
 | Version Incompatibility, See Note 1
 |-
 | E-Ad
@@ Line 41: / Line 21: @@
 | HDF File has been incorrectly produced
 |-
-| E-Ft
+| E-AS
-| Flash Program Time Out
+| Incorrect Application Size
-| Flash Memory Fault, Retry or Replace STB
+| Incorrect / Corrupted HDF
 |-
-| E-It/Et
+| E-dC
-| EEPROM Program Time Out
+| Incorrect Data Block (CRC-16)
-| EEPROM Memory Fault, Retry or Replace STB
+| Software Damaged, Retry or Replace
 |-
 | E-FE
 | Failed Compare After Flash Write
 | Flash Memory Fault, Retry or Replace STB
 |-
 | E-HF
@@ Line 57: / Line 49: @@
 | HDF File has been incorrectly produced
 |-
-| E-Fn
+| E-Hn/bF
-| Invalid Flash Devise
+| Invalid HDF Version
-| Flash Memory Fault, Retry or Replace STB
+| Incorrect Version, See Note 1
 |-
-| E-AS
+| E-It/Et
-| Incorrect Application Size
+| EEPROM Program Time Out
-| Incorrect / Corrupted HDF
+| EEPROM Memory Fault, Retry or Replace STB
 |-
 | E-OS
 | Incorrect Operating System
 | Retry after a Set to Factory Default
 |}

@@ Line 76: / Line 76: @@
 This may be displayed for many reasons they include :-
-* Unexpected system parameters on your Humax unit due to testing of Beta software or incorrect factory settings, Expect to find:- Loader Version = a7.30 or later  System ID = 80BC.7E00   MAC address (first 6 digits) = 000378 or DCD321
+* Unexpected system parameters on your Humax unit due to testing of Beta software or incorrect factory settings, Expect to find:- Loader Version = a7.30 for the HDR and L7.27 for the HD or later,  System ID = 80BC.7E00 for the HDR and 806c.7000 for the HD, MAC address (first 6 digits) = 000378 or DCD321
 * Corrupted HDF File
 * Bad communication to USB device

@@ Line 1: / Line 1: @@
 During a software update, where an HDF file on USB stick is presented to a HUMAX unit, The progress of the update is monitored until completion, If an error is detected a code will be displayed on the front panel and the process will be halted, The same codes will be displayed for both Original and Customised firmware, As this is not a function of the Customised Firmware.
 [[File:blank2.jpg|50px|right]]
-[[File:error-e-hc.png|300px|right]]
+[[File:error-e-hc.png|200px|thumb|right]]
 {| border="1"

@@ Line 7: / Line 7: @@
 ! width="50"|Error Code Displayed
 ! width="200"|Description
-! width="310"|Explanation / Fix
+! width="280"|Explanation / Fix
 |-
 | E-HC/bC
@@ Line 31: / Line 31: @@
 | E-ut
 | UART RX/TX Time Out
-| Communications problem (Via Com port) See Note 2
+| Communications problem See Note 2
 |-
 | E-Ad