View source for Install Modified Firmware

The procedure for upgrading Humax software, both original and customised (modified) is detailed below.

==HDR Fox T2==

* [[Firmware_Downloads | '''Download the firmware''']] and, if it is a zip file, extract it
* Ensure the resulting file name is ''hdr_fox_t2_upgrade.hdf'', place it in the root of a FAT32 formatted USB Flash / disk Drive *
* Put the unit into standby using the remote or big button on the front
* Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click)
* Remove all USB devices
* Plug the USB Flash Device containing the HDF file into a USB port
* Turn on the TV and switch to the Humax input
* Start up the Humax using the big button on the front
* The software update should begin automatically and progress is shown on the TV screen
* The initial ''download'' is very quick and then programming takes 2-3 minutes
* Pauses in the percentage time bar are quite normal
* A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']]
* When the update is complete ''End'' will appear on the front display and ''Success Downloading!'' will appear on the TV
* Unplug the USB Flash Device containing the HDR_FOX_T2_Upgrade.hdf file
* Reconnect any other USB devices e.g. Wi-Fi adapter, Hard disk Drives etc. (ensure that the HDF file is not present)
* Press the big button on the front again to restart with the new firmware
* All current versions of Custom Firmware will display 'CUST 2.12' or similar during boot-up


'''To Install a Full Web Interface Continue''' [[Install_Full_Web_Interface | '''HERE''']]



==HD Fox T2==

{{note|The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be connected when operating with Custom Firmware otherwise it will not be possible to install additional software packages. Flash devices must be formatted in EXT2 using a P.C. program such as GParted “Live” CD, or by using the Custom Firmware package [[FAQs#How_do_I_convert_a_drive_to_EXT2.3F|'''tune2fs''']]. Hard Disk devices should remain in EXT3 as formatted by the HD FOX T2

A Guide to converting a USB flash drive to EXT2 for Custom Firmware operation is [[Converting_a_USB_Flash_Drive_to_EXT2_on_a_HD-Fox_T2 | '''HERE''']]
}}
* [[Firmware_Downloads | '''Download the firmware''']] and, if it is a zip file, extract it
* Ensure the resulting file name is ''hd_fox_t2_upgrade.hdf'', place it in the root of a FAT32 USB Flash / Disk drive *
* Put the unit into standby using the remote, or power button on the front
* Plug the USB Flash device into the USB port 
* Turn on the TV and switch to the Humax input
* Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
* The initial ''download'' is very quick and then programming takes 2-3 minutes
* Pauses in the percentage time bar are quite normal
* A list of possible Error codes that may be displayed are detailed [[Firmware Error Codes|'''HERE''']]
* When the update is complete ''End'' will appear on the front display and ''Success Downloading!'' will appear on the TV
* Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf file
* Reconnect a USB Flash / Hard Disk drive formatted in EXT2 / EXT3 (See Note above)
* Press the power button on the front to restart with the new firmware


'''To Install a Full Web Interface Continue''' [[Install_Full_Web_Interface | '''HERE''']]



{{note|
Some USB Flash / Disk Drives* are reported not to work. The reason for this is not fully understood; however the following tips are known to help :- 
* Remove any other USB devices and power cycle twice (waiting for HDD spin down each time)
* Do not use a USB extender cable
* Removing all other files / re-formatting can prevent file fragmentation
* Try both USB ports (HDR)
* As a last resort, try a different USB Flash Drive
}}